PiezoCeramic Available Size
PiezoCeramic Available Shapes and Mechanical Tolerances
In addition to the shapes shown, custom shapes are also available. Parts can be made to the size ranges shown, but not in every combination of thickness and lateral dimensions. A separate list of standard sizes of parts available can be obtained on request
Standard Mechanical Tolerances
Tolerances on machined dimensions apply to most components. For large size parts, confirmation of the tolerances achievable will need to be agreed prior to placing an order. Components can be produced to tighter tolerances (e.g. Concentricity within 0.13mm (0.005”) TIR and surface finish (Ra) within 1.6μm (62μin)).
Care should be taken not to over-specify a tolerance as this can significantly increase costs.
| Piezo Disk | From | To |
|---|---|---|
| Diameter | 3 mm (0.12″) | 255 mm (10″) |
| Thickness | 0.2 mm (0.008″) | 25 mm (1″) |
| Piezo Disk | From | To |
|---|---|---|
| Diameter | 3 mm (0.12″) | 255 mm (10″) |
| Thickness | 0.2 mm (0.008″) | 25 mm (1″) |